TP0099

410,-€

ADV -T piece

T-piece-ADV for ATS BMCL or IQ/Golem with APEKS XTX50 second stage

Various hose  connections possible

Price is for T piece including Apeks ADV unit and locking nut

Does have watertrap

can have 3/8 hole for MAV connection

120,-€ / piece

140,-€ with nuts

T-piece: ATS-BMCL to connect Poseidon breathing hoses

Price is per T-piece and it comes without the 9/16 connector and without the nuts

you can use the oringinal parts

3/8 UNF hole can be drilled

120,-€ / piece

140,-€ with nuts

T-piece: GOLEM-BMCL to connect Poseidon breathing hoses

Price is per T-piece and it comes without the 9/16 connector and without the nuts

you can use the oringinal parts

3/8 UNF hole can be drilled

120,-€ / piece

140,-€ with nuts

T-piece: GOLEM-BMCL to connect Inspiration breathing hoses

Price is per T-piece and it comes without the 9/16 connector and without the nuts

you can use the oringinal parts

3/8 UNF hole can be drilled

120,-€ / piece

140,-€ with nut

T-piece for the MEG 
 to connect Poseidon or Ray  breathing hoses..
or...Please tell which ....

Price is per T-piece and it comes without the 9/16 connector and without the nuts

you can use the oringinal parts

3/8 UNF hole can be drilled

sample shown for Ray hoses, small ends

145,-€ per piece with nut

T-piece for the MSR bags

with anticollaps extension and watertrap

sample seen here for 38mm hoses

other hose fittings are possible

245,-€

Special elbow with 3 connections

- male connector to Sidewinder scrubber

- fitting to MSR bag

- fitting for 36mm hose

plus a 3/8 UNF femal inlet for gas injection

All three big fittings are screwed in and interchangeable

Block itself is symetric

165,-€ per piece/ with nut

90 degree hose connection T-piece for the MSR bags

with anticollaps extension and watertrap

sample seen here for 38mm hoses

other hose fittings are possible

170,-€ with nut and p-port 

90 degree elbow

MSR Waterbag connection to female p-port

320,-€

T-piece with ADV for the MSR bags

with anticollaps extension and watertrap

sample seen here for 38mm hoses

other hose fittings are possible

140,-€ / piece

155,-€ with nut

T-piece for the ATS BMCL

special for for a SI Tech inlet valve,

so it can be used as manual add

does have a watertrap

shown here for Poseidon hose connection

210- € with nut and valve

complete

T-piece for the ATS BMCL

special for for a SI Tech inlet valve,

so it can be used as manual add

does have a watertrap

210,-€ / piece

225,-€ with nut

T-piece with O2 sensor house attached

for the ATS BMCL

special for for a SI Tech inlet valve,

so it can be used as manual add

does have a watertrap

shown here for Poseidon hose connection

275,- € with nut and valve

T-piece with O2 sensor house attached

for the ATS BMCL

special for for a SI Tech inlet valve,

so it can be used as manual add

does have a watertrap

shown here for Poseidon hose connection

145,-€ with nuts

price per piece

T-piece for the MEG CL´s

with 90 degree hose connection
 

the shown sample is for 35mm hose connection

other CL connectors are possible on request

185,-€ 

T-piece for various fittings

This is a special T-Piece-sensor house combination

PSR 11 39 MD3/MHD cells fit in

sample shown for ATS BMCL fitting with left handed thread nut

and with 3/8 UNF thread to inject gas

more pictures on BMCL side

240,- €

price without hose and 3/8 angle

NEW style sensor T-piece
with 3/8 hole for Dil injection

Made from solid block of POM

The sensor chamber is turnable

Our standard plugs with nut fit here to close in case you like to use it without sensor.

Standard cells fit in and also the chamber can be replaced with the original Poseidon solid state chamber/sensor

The sensor is in the center and in front of the sensor the water trap ahs a very small bypass to allow gas passing through fro best ventilation

The small hole seen on the middle picture is the gas inlet. Is goes through the water trap to avoid pushing moisture to the cell surface

120,-€ / piece

REPLACEMENT -  T-Piece

made from one solid block POM
with watertrap
 

yes, it can have a drilled/threaded 3/8 UNF hole on one side, centered

100,-€ 

p-Port T

p-port-T to connect two Ray hoses  (small end) to a p-port
does have a water trap of course

p-Port T

p-port-T   to connect two xx- hoses   to a p-port
does have a water trap of course

90,-  to 120,- Euro €

Specify your hose fittings you like 
 

e-mail -- martin@tecme.de

Alle Preise, die auf der Webseite angegeben sind verstehen sich inklusive der gesetzlichen MwSt. und zzgl. Versandkosten

Für unsere Waren bestehen die gesetzlichen Gewährleistungsrechte