cables computers Extras
our  BLACK/noir cable,

for Shearwater, VR3, X1

Pining

Pin 1 -> grün/green/verde (Minus all sensors)
Pin 2 -> gelb/yellow/jaune 
Pin 3 -> grau/grey/gris
Pin 4 -> rosa/pink/rose

Pin 5 -> blau/blue/bleu
Pin 6 -> weiss/white/blanc
Pin 7 -> braun/brown/marron

If you have the black cable with 8 wires ..IGNORE the red wire..rest is the same as above
---------- -



 

  

Shearwater/X1


Pin 1 : minus (all 3 sensors)
Pin 2 : plus Sensor 1
Pin 3 : plus Sensor 2
Pin 4 : plus Sensor 3

VR3
Pin 1 = Minus
Pin 3 = +
 

when using Persuit with only one Sensor

use Pin1 as Minus

and Pin 3 for plus (single sensor)

 The original blue cable, coming with Shearwter HUD or fixed cable Persuits

The white is negative.  (or all whit are negative)

Brown, green or blue, and grey are the positive side for each of the sensors.

So:

·  Sensor 1 - Brown

·  Sensor 2 - Green or Blue (single cell connection)

·  Sensor 3 - Grey

white   ALL minus

 
our old GREY/gris cable (not sold anymore!)

Pining


Blau/blue,/bleu     =       pin 1
Weiß/white/blanc =      pin 2
Braun/brown/Marron=   pin 3
Grün/green/verd =         pin 4
Gelb/yellow/jaune =      pin 5
Grau/grey/gris =           pin 6
Rosa/pink/rose =         pin 7

 

   pinning on all R22D and compatible sensors!

 

So even most molex plugs have three wires you always need only the two external, center is N/A
   

 

The offical nomenclature for the Fischer plug.

Center is pin 1   NOT 7 as stated somewhere!

We at Tecme follow the official pin #  given from Fischer itself.